WU JIANWU JIAN LLC · Tomsk Region, Russia

Interior-grade plywood

Birch FK plywood 1222×2440 mm: sanded surface, emission class E1 confirmed by a test report.

Stacks of finished sanded plywood in the warehouse

This is our base item for furniture and finishing production. Birch veneer gives a dense, uniform surface that takes veneer, film and paint well, while FK urea glue provides sufficient water resistance for normally humid interiors.

  • Emission class E1 — formaldehyde not detected in the sample
  • Glue line shear strength 3.2 MPa against a minimum of 2.0 — 60% above the standard
  • 1222×2440 mm format, thickness and grade to your specification

Technical specification

Base parameters confirmed by the test report. Thickness and grade charts are available on request.

Wood speciesbirch
Sheet format1222 × 2440 mm
Thicknesson request
Glue typeFK (urea)
Emission classE1
StandardGOST 3916.1-2018
Gradeon request
Packaging and lot sizeon request

Only document-confirmed parameters are listed. The full thickness and grade range is in the commercial offer.

Where it is used

Typical use cases. We select thickness and grade for your specific task.

Furniture fronts

Flat sanded surface for veneer, film and painting.

Interior finishing

Walls, ceilings and decorative panels in residential and public spaces.

Door blanks

Stable sheet geometry, no warping after cutting.

Shelving

High bending strength at low thickness.

Need prices and samples?

We will send a commercial offer, thickness chart and document copies as soon as possible.

Request a commercial offer