Plywood for industrial packaging
Strong birch plywood for crates, framing and equipment packaging. Holds fasteners and repeated transport loads.

An item for packaging producers and machine builders. Birch delivers high bending strength, so a thinner sheet still gives rigid packaging — saving weight and cost without losing protection.
- Static bending strength 16.2 MPa against a minimum of 13.0 — 25% above the standard
- Holds nails, staples and screws well without splitting
- Stable sheet geometry — convenient for serial crate assembly
Technical specification
Base parameters confirmed by the test report. Thickness and grade charts are available on request.
| Wood species | birch |
|---|---|
| Sheet format | 1222 × 2440 mm |
| Thickness | on request |
| Glue type | FK (urea) |
| Standard | GOST 3916.1-2018 |
| Grade | on request |
| Packaging and lot size | on request |
Only document-confirmed parameters are listed. The full thickness and grade range is in the commercial offer.
Where it is used
Typical use cases. We select thickness and grade for your specific task.
Crates and boxes
Assembled crates for machinery and equipment: rigidity at low sheet thickness.
Framing and bracing
Frames, spacers and protective shields for oversized cargo.
Export packaging
Equipment packaging that keeps its geometry in sea and rail transport.
Decking and returnable packaging
Replaceable decking, lids and elements of returnable containers.
Need prices and samples?
We will send a commercial offer, thickness chart and document copies as soon as possible.